Roller is an important component of belt conveyor.It has many kinds and large quantity,can support conveyor belt and material weight.
|Model NO.||Steel roller|
|Seal||Multiple labyrinth seal|
|Bearing type||Deep Grove ball bearing|
|Advantages||waterproof,dustproof,smooth running,no noise,rotational resistance, axial float, shaft radial play|
A) Bearing: deep groove ball and double sealing bearing 2RZ and 2Z with C3 clearance;
B) Sealing: multi-stage labyrinth seals achieve waterproof and dust proof
C) Lubrication: Grease is Lithium soap type grease with Rust Inhibitors, grease is permanent lubricant.
D) Color: roller surface could be painted any color as per customer request.
E) Each roller would be through strict inspection and test to ensure every out coming roller is of true high quality;
1. Seal assembly
The seal assembly of idler is made of nylon, and the structural from is non-contact labyrinth seal structure.
The inner and outer seals from a labyrinth passage with high precision, and the passage is filled with long-acting lithium-based grease, so that the idler has good waterproof and dustproof performance.
The bearing of Idler adopts special C3 clearance grade deep groove ball bearing.
Before assembly, the bearing of idler has been filled with lithium base grease and sealed permanently on both sides, which can realize lifetime maintenance free and extend the service life of the bearing.
The shaft of idler adopts high precision cold drawn round steel after quenching and tempering treatment. Advanced Chamfer milling machine is used to perform accurate machining at both ends of the shaft, so as to ensure that the axial displacement of the idler is almost zero.
4. Bearing housing
The fabrication of the bearing housing consists of a multi-stage precision automatic pressing operation, which ensure high accuracy of bearing and sealing position.
The idler pipes and bearing housing at both ends are 3mm fully fillet welded at the same time trough CO2 gas shield double-gun automatic welding machine, which gives a minimum of 70% weld penetration,and ensures that the idler even under the high load and high speed operation, still strong and durable.
The shell of idler adopts special ratio-frequency welded pipe with small bending degree and small ellipticity.
The advanced steel tube chamfer cutting off tool machine is used for predsemachining of both ends of pipe, which can effectively guarantee the concentricity of idlers and minimize the rotation resistance of idlers
Quality design and build
Our focus on quality starts with sourcing only the best raw materials, rejecting anything that falls outside our strict tolerances.During manufacture your order is checked at each stage before passing through to the next process. This also contributes to our ability to meet orders on time.
Packaging & Shipping
Q: Are you a factory or trading company?
A: We are a factory and have export license. Besides, our factory has a number of product lines to provide products with stable production capacity for customers in delivery time.
Q: What information shall I provide in order to confirm the conveyor carrying rollers order?
A: We work with technical drawings for any non-standard products. If the order is for standard parts, you only have to provide us with the part number so we may define the parts of the order.
Q: How does your factory do regarding to quality control?
A: Quality is priority. We always attach great importance to quality control from beginning to the end of the
production. Every batch rollers will be carefully inspected before it's packed for shipment.
Q: Do you have the products in stock?
A: No. All rollers are produced according to your order.
Q: Can I order a sample?
A: Of course. We can offer regular model roller sample for free, but the freight cost shall be borne by your side. If you want
customized model sample, we'd like you to bear the charge for sample and freight.
Q:Hong long is your delivery time?
A:Normally 7-30 days ,it depends on your quantity.For Decent order , we have flexible adjustment to ensure the delivery time.
If you do not see the question you are looking for, please contact us for further assistance.
Contact Person: Lisa Lee
|Application:||Chemical Industry, Grain Transportation, Mining Transport, Power Plant|
|Bearing Type:||Double Sealed Bearing|
|Type:||Grooved Conveyor Idler|
|Roller Diameters:||Any Sizes Available on Request)|
What makes pulleys so important?
A pulley is a simple tool that makes it easy to lift or move heavy objects. There are many uses for this tool, but let's take a look at their mechanical advantages. There are several types and many applications, along with their benefits and costs. So what makes them so important? Read on to find out! Below are some of the most common uses for pulleys. Let's dive into them.
If you've ever used rope and pulley systems, you've probably noticed their usefulness. A 3:1 mechanical advantage system is like a 300-pound load being moved one foot up by three feet of rope. Then you can imagine using the same rope to get into a small space. The same principle applies to limited spaces, and a simple mechanical advantage system is just what you need for this purpose.
Assuming frictionless bearings, a single movable pulley can have two mechanical advantages. It is attached to a heavy object and requires the pulling force exerted by the jack to lift the heavy object. However, when you use a compound pulley, the force exerted on the rope to lift the object changes direction. The three factors used to measure machine efficiency are force, distance, and relative motion.
The mechanical advantage of the pulley is that it reduces the effort required to lift weights. When the rope is attached to the two wheels, applying a force of 500 Newtons can lift a mass of 100 kg. This mechanical advantage is why two rings in a pulley are better than one. Therefore, using a pulley system will save you energy. You can also use branches instead of ropes and pulleys.
There are several different types of pulleys. They can be simple or complex, depending on how they are connected. Simple pulleys have a grooved wheel on one end and are attached to an axle. These pulleys are used to lift heavy objects. They are often found on sailboats, and you can even see them on construction sites. On the other hand, stationary pulleys are attached to stationary structures, such as flagpoles. Fixed pulleys can also be used to lift loads from trucks or trains. Pulleys are also commonly used in wells.
Fixed pulley systems use rollers or single wheels. These pulleys are usually made of nylon or wire rope. They are used in heavy duty applications. They are also used in electric motors. A "V" pulley requires a "V" belt to transmit power. Some of these pulleys have multiple "V" grooves to reduce the risk of power slipping. Once installed, fixed pulleys are suitable for many applications.
Simple pulleys are simple pulleys. It has a pulley mounted on an axle and a rope at one end. Rope can be used to pull objects, while plastic pulleys can carry lighter loads. There are two main types: heavy duty and simple pulley systems. In either case, their function is the same: they change the direction in which the seat belt is fastened. So when comparing the two, it's easy to decide which one is best for you.
Pulley systems are simple machines used for a variety of industrial and mechanical tasks. Its design parameters and benefits have improved over the years, but they remain essential for many applications. Let's take a look at some of the most common applications of pulleys. The applications for pulley systems are endless, from construction to mining, from transportation to packaging. Read on to learn more!
Pulley systems are often used to lift large objects, such as blocks, that might otherwise be too heavy to lift. It also makes the exploration process easier by helping people pull heavy objects into place. It is also widely used on sailing ships. Due to its low cost of use and no need for lubrication, it is a practical choice for many applications. It can be used to lift heavy objects and support long ropes.
The pulley system allows you to change the force required to move the object. For example, a two-wheel pulley system is especially useful for reducing the effort required to lift large objects. The mechanical advantage increases with the number of wheels in the system. In addition, the mechanical advantage of a two-wheel pulley system depends on the ratio of the load weight to the number of rope segments in the system.
In most cases, an idler replacement will cost around $150, but the exact cost will depend on several factors, including the make and model of the car. The cost also depends on the type of idler you need and the cost of the OEM parts. Some pulleys are easy to replace at home, while others require specialized tools, such as pulley wrenches. The chart below shows the cost of popular vehicles. Prices are valid at the time of writing.
The diameter of the pulley is also important, this should be about 60% of the diameter of the active pulley. You can also purchase compensating pulleys at factory prices. Be sure to select the correct size before placing the pulley on the machine. Also, make sure you have enough space for the pulleys. Once you have the desired pulley size, you can determine the best type of belt to install.
While this method is the most common type of belt drive, there are other methods of spinning cup blanks directly from a flat metal disk. One such method is described in US Patent No. 5,500,31. US Patent No. 1,728,002 and shows a method of making a dynamically balanced V-groove pulley. Using a headstock die with sliders increases the cost of the pulley. In addition, different cup blanks require different molds.
The lubrication of pulley bearings is relatively simple. The pulley itself rotates smoothly with little vibration. Bearing contact loads are relatively low, and well-lubricated pulleys operate near ambient temperatures. Here are some tips for properly lubricating pulley bearings. Make sure to lubricate the nozzle before applying grease.
Check grease, elastic ring, pulley bearing clearance once a year. If the elastic ring of the pulley is damaged or the roller bearing on the associated pulley is damaged, replace the pulley. Also, check the running noise of the pulleys to see if they are making noise. Check the bearing, damage to the elastic ring may indicate bearing failure or roller failure.
Proper lubrication is critical to the life of the rotating pinion. Avoid exposure to sunlight or water. Protects the pinion meshing area from hard impurities. Liaise with crane operators and lubricators during maintenance and lubrication operations. They should know how to avoid pitfalls in the lubrication process. In case of malfunction, please contact service personnel and take necessary measures.
Compound Pulley System
A compound pulley system is used to lift heavy objects. These systems can use ropes or cords of different sizes. In general, the total weight of all ropes must be less than the weight of a single rope. The system can be used in large areas, but may not be suitable for smaller spaces. To learn more about compound pulleys, read on! Here are some helpful tips. 1. Understand the difference between single wheel and compound wheel
A composite pulley system consists of three components: a drive pulley, one or more driven pulleys, and two pulleys. The drive wheels are usually connected to shafts that are connected to the engine or transmission. The driven wheel is a separate unit mounted on the same shaft as the drive wheel. A compound pulley system helps lift heavy loads. These pulleys are the most common type of pulley system in use today.
Composite pulley systems are widely used on construction sites. They save energy by spreading the weight of heavy loads over multiple smaller loads. This means that the elevator does not have to use high-capacity lifting equipment. Additionally, the compound pulley system allows users to easily adjust power distribution to meet their individual needs. They can also use more than two ropes if necessary. This increases the range of motion of the lift arm.
editor by CX