Tag Archives: timing chain

China best Mxl XL L Htd 3m 5m 8m Aluminum Alloy Timing Synchronous Automotive Rubber Poly V Transmission Belt Pulley chain pulley

Product Description

INDUSTRIAL TIMING PULLEY 

.  Feature

Our Timing Belt uses Japan-imported high quality synthetic neoprene, high quality glass fiber cord and tooth surface with nylon 66 high stretch do the protection. The timing belt adapts teeth or teeth mesh to transfer power. It needs no lubrication, no slip, no pollution, less noise. The transmission efficiency is over 98%, and the speed ratio can reach 1:10. Linear velocity can be up to 50m/s. Its dynamic bending wind gives a good fatigue performance, and good aging heat-resistance abrasion performance.

. Parameters

Figure 1. Physicomechanical Property

Item  Trapezoid Teeth Arc Teeth
XL L H XH XXH 3M 5M 8M 14M 20M
Tensile Strength N/mm 80 120 270 380 450 90 160 300 400 520
Elongation Reference at Loading   N 60 90 220 300 360 70 130 240 320 410
Adhesion strength of cloth N/mm 5 6.5 8 10 12 - 6 10 12 15
Adhesion strength of core N/mm 200 300 600 800 1500 - 400 700 1200 1600
Gear shearing intensity N/mm 50 60 70 75 90 - 50 60 80 100
Elongation ≤ % 4%
Hardness Shore A 75 ± 5

Figure 2: Belt Teeth Size

Type Pitch (pb) mm Tooth height (ht) mm Belt thick (hs) mm Angle
MXL 2.032 0.51 1.14 40º
XXL 3.175 0.76 1.52 40º
XL 5.080 1.27 2.3 40º
L 9.525 1.91 3.6 40º
H 12.7 2.29 4.3 40º
XH 22.225 6.35 11.2 40º
XXH 31.7 9.53 15.7 40º
T2.5 2.5 0.7 1.3 40º
T5 5.0 1.2 2.2 40º
T10 10 2.5 4.5 40º
T20 20 5.0 8.0 40º
AT5 5.0 1.2 2.7 40º
AT10 10 2.5 5.0 40º
AT20 20 5.0 8.0 40º

 
. Production Equipment
01, pulley CNC processing zone                            02, synchronous belt making machine                  03, synchronous round roll teeth processing zone
04, synchornous belt curing processing zone        05, 3 roll calender                                            06, direct drive belt forming machine
07, pulley workshop timing mould

. Quality Testing
 

FAQ

Q1.  Can I have a sample order?
        Yes, any sample order is welcome to know the quality of our products.

Q2.  What about the lead time of the sample or the final order?
        2-5 days for normal sample.
        20-30 days for a formal order.

Q3. How much is the minimum quantity for each item in 1 order?
       One mould quantity is ok. Usually around 100pcs for small item, several dozens for big item. 

Q4. Is it possible to print our logo or brand on the belt?
       Yes, we can print your logo or design on the belt after receipt of your formal authorization        letter of the logo or your brand.

Q5. Do you offer the guarantee for your product?
       Yes, usually we offer 1 year warranty for all of our products.

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard: Standard
Application: Electric Cars, Motorcycle, Car
Feature: Wear-Resistant, High Temperature-Resistance
Tensile Strength: Strong
Material: Rubber
Type: Toothed Belt
Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

htd pulley

Can HTD pulleys withstand harsh environmental conditions?

HTD pulleys are designed to be durable and withstand a wide range of operating conditions. However, their ability to withstand harsh environmental conditions depends on various factors, including the materials used, the specific design and construction of the pulleys, and the severity and duration of the environmental conditions. Here's a detailed explanation of the factors that affect the ability of HTD pulleys to withstand harsh environmental conditions:

1. Material Selection:

The choice of materials for HTD pulleys plays a crucial role in their ability to withstand harsh environmental conditions. Different materials have varying levels of resistance to factors such as temperature extremes, moisture, chemicals, and UV radiation. Common materials used for HTD pulleys include aluminum, steel, and various types of plastics. Each material has its own strengths and limitations in terms of environmental resistance. For example, aluminum and steel pulleys are generally more resistant to high temperatures and mechanical stress, while certain plastics offer better resistance to corrosion and chemical exposure. Pulleys made from materials with suitable properties for the specific environmental conditions they will be exposed to are more likely to withstand harsh conditions effectively.

2. Sealing and Protection:

In some cases, HTD pulleys may be equipped with additional sealing or protective measures to enhance their resistance to harsh environmental conditions. Seals or covers can be added to the pulley assemblies to protect the internal components from dust, moisture, or contaminants. These protective measures help prevent the ingress of foreign particles or fluids that could potentially affect the performance or lifespan of the pulleys. Pulleys with effective sealing and protection mechanisms are better equipped to withstand harsh environments.

3. Temperature Extremes:

HTD pulleys are generally capable of operating within a wide temperature range. However, extreme temperatures, whether high or low, can pose challenges to their performance and longevity. High temperatures can cause thermal expansion, which may affect the dimensional stability of the pulleys and result in misalignment or increased wear. Low temperatures can lead to material brittleness and reduced flexibility, potentially impacting the pulleys' ability to transmit power effectively. Pulleys designed for specific temperature ranges or those made from materials with superior temperature resistance properties are better suited for harsh temperature environments.

4. Moisture and Humidity:

Moisture and humidity can have a detrimental effect on the performance and lifespan of HTD pulleys, particularly if they are not adequately protected. Excessive moisture can lead to corrosion or rusting of metal pulleys and can degrade the performance of certain plastic materials. It can also cause lubricants to break down or wash away, resulting in increased friction and wear. Proper sealing, the use of corrosion-resistant materials, and regular maintenance to remove moisture buildup are essential for ensuring the pulleys' ability to withstand humid or wet environments.

5. Chemical Exposure:

In environments where HTD pulleys are exposed to chemicals, their resistance to chemical corrosion becomes crucial. Certain chemicals can degrade the material properties of pulleys, leading to reduced strength, dimensional changes, or surface deterioration. The resistance of HTD pulleys to specific chemicals depends on the materials they are made from. It is important to select pulley materials that are compatible with the chemicals present in the environment to ensure long-term performance and reliability.

6. UV Radiation:

If HTD pulleys are exposed to direct sunlight or other sources of UV radiation, their resistance to UV degradation becomes important. Prolonged exposure to UV radiation can cause certain materials, such as plastics, to become brittle, fade in color, or experience surface degradation. Pulleys made from UV-resistant materials or those protected with coatings or additives that enhance UV resistance are better equipped to withstand outdoor or UV-exposed environments.

7. Application-Specific Considerations:

Finally, the specific application and operating conditions of HTD pulleys should be taken into account when assessing their ability to withstand harsh environmental conditions. Factors such as vibration, shock, dust, or abrasive particles present in the environment can affect the pulleys' performance and lifespan. Understanding the unique requirements of the application and selecting pulleys that are designed or modified to meet those requirements can significantly enhance their ability to withstand harsh conditions.

In summary, the ability of HTD pulleys to withstand harsh environmental conditions depends on factors such as material selection, sealing and protection measures, temperature resistance, resistance to moisture and humidity, resistance to chemicals and UV radiation, and application-specific considerations. By considering these factors and selecting pulleys that are appropriately designed and constructed for the specific environmental conditions, their performance and longevity can be optimized even in challenging operating environments.

htd pulley

What maintenance procedures are necessary to ensure the reliability of HTD pulleys?

To ensure the reliability and optimal performance of HTD pulleys, several maintenance procedures should be followed. These procedures help identify and address potential issues, prevent premature wear or failure, and extend the lifespan of the pulleys. Here's a detailed explanation of the necessary maintenance procedures for HTD pulleys:

1. Regular Inspection:

Regular inspections are essential to identify any signs of wear, damage, or misalignment in HTD pulleys. Inspect the pulleys visually, looking for cracks, chips, or deformations. Check the teeth for excessive wear or damage. Ensure that the pulleys are properly aligned and that there are no signs of excessive vibration or noise during operation. Regular inspections allow for early detection of potential problems, enabling timely maintenance or replacement of the pulleys to prevent further damage or failures.

2. Belt Tension Checks:

Proper belt tension is crucial for the reliable operation of HTD pulleys. Insufficient tension can cause belt slippage, while excessive tension can lead to premature wear on the pulleys and belts. Regularly check the belt tension using appropriate tensioning tools or methods recommended by the pulley manufacturer. Adjust the tension as needed to ensure it falls within the specified range. Maintaining the correct belt tension helps optimize power transmission, reduce wear, and prevent belt failure.

3. Lubrication:

Lubrication is important for reducing friction and wear in HTD pulleys. Some pulleys may require periodic lubrication of the bearings or bushings to ensure smooth operation. Consult the manufacturer's guidelines to determine the appropriate lubrication intervals and the type of lubricant to use. Apply the lubricant as recommended, taking care not to over-lubricate. Proper lubrication helps minimize friction and heat generation, extending the lifespan of the pulleys and ensuring reliable performance.

4. Alignment:

Proper alignment of HTD pulleys is crucial for their reliability. Misalignment can cause premature wear on the belts, pulleys, and bearings, leading to reduced performance and potential failures. Regularly check the alignment of the pulleys using alignment tools or methods recommended by the manufacturer. Adjust the pulley positions as necessary to ensure proper alignment. Proper alignment ensures efficient power transmission, reduces wear, and minimizes the risk of belt slippage or premature failure.

5. Cleaning:

Keeping HTD pulleys clean is important for their reliable operation. Regularly clean the pulleys to remove dust, debris, or other contaminants that can accumulate on the pulley surfaces or teeth. Use a soft brush or cloth to gently clean the pulleys, taking care not to damage the teeth or other delicate parts. Avoid using harsh chemicals that can degrade the pulley material. Clean pulleys contribute to improved belt traction, reduced wear, and enhanced overall reliability.

6. Replacement of Worn or Damaged Components:

If any HTD pulley components, such as the pulleys themselves or the belts, are worn, damaged, or nearing the end of their lifespan, they should be replaced promptly. Worn or damaged pulleys can compromise the performance and reliability of the entire system. Follow the manufacturer's recommendations for replacement parts and ensure that the new components meet the required specifications. Timely replacement of worn or damaged components helps maintain the reliability and longevity of HTD pulleys.

7. Follow Manufacturer's Guidelines:

Lastly, it is important to follow the specific maintenance guidelines provided by the HTD pulley manufacturer. Different pulley designs and materials may require specific maintenance procedures or intervals. Consult the manufacturer's documentation for detailed instructions on maintenance, lubrication, inspection, and any other relevant procedures. Adhering to the manufacturer's guidelines ensures that the pulleys are maintained correctly and maximizes their reliability and performance.

In summary, to ensure the reliability of HTD pulleys, regular inspections, belt tension checks, lubrication, alignment, cleaning, replacement of worn components, and adherence to the manufacturer's guidelines are necessary. By following these maintenance procedures, the lifespan of HTD pulleys can be extended, and their reliable operation can be ensured, minimizing downtime and optimizing the performance of the systems in which they are used.

htd pulley

How do HTD pulleys contribute to efficient power transmission?

HTD pulleys, which stand for "High Torque Drive" pulleys, play a significant role in ensuring efficient power transmission in various mechanical systems. Here's a detailed explanation of how HTD pulleys contribute to efficient power transmission:

1. Tooth Profile and Tooth Engagement:

HTD pulleys have a specific tooth profile that matches the shape of HTD belts. The trapezoidal tooth profile allows for a larger contact area between the pulley and the belt compared to other pulley types. This increased contact area improves the power transfer efficiency by reducing the concentration of forces on individual teeth. The efficient tooth engagement minimizes slippage and ensures a reliable transfer of power from the pulley to the belt.

2. Precise Timing and Synchronization:

HTD pulleys and belts are designed to provide accurate timing and synchronization between the driving and driven components. The teeth of the pulley and belt interlock precisely, ensuring that the rotational motion is transferred with minimal timing errors. This precise timing is crucial in applications where multiple components need to work together, such as in robotics, automation, and CNC machines. By maintaining accurate timing and synchronization, HTD pulleys contribute to efficient power transmission without the loss of energy due to timing inconsistencies.

3. Reduced Backlash:

Backlash refers to the slight movement or play that can occur between the teeth of a pulley and the corresponding belt. HTD pulleys are designed to minimize backlash, which helps in maintaining accurate motion control. By reducing backlash, HTD pulleys prevent energy loss and ensure precise power transmission. This is particularly important in applications where precise positioning or synchronization is required, such as in CNC machines or robotic systems.

4. Load Distribution:

HTD pulleys distribute the transmitted load evenly across the teeth of the pulley and belt. The trapezoidal tooth profile and the design of HTD belts allow for a larger contact area between the teeth, resulting in better load distribution. This even load distribution helps prevent tooth wear, reduces the risk of tooth damage, and improves the overall efficiency of power transmission. It ensures that the power is evenly distributed across the pulley, minimizing any concentration of stress or load on individual teeth.

5. Material and Construction:

HTD pulleys are available in various materials, including aluminum, steel, or plastic. The material choice depends on factors such as the application requirements and environmental conditions. The selection of appropriate materials contributes to efficient power transmission by ensuring the pulleys' durability, strength, and resistance to wear and fatigue. The use of high-quality materials also reduces friction and heat generation, further enhancing the efficiency of power transmission.

6. Belt Retention and Stability:

HTD pulleys often feature flanges on either side of the toothed section. These flanges help keep the HTD belt properly aligned and prevent it from slipping off the pulley during operation. The flanges provide lateral guidance and improve the overall stability of the belt. By ensuring secure belt retention, HTD pulleys minimize the risk of power loss due to belt misalignment or disengagement, contributing to efficient power transmission.

In summary, HTD pulleys contribute to efficient power transmission through their specific tooth profile, precise timing and synchronization, reduced backlash, even load distribution, choice of quality materials, and belt retention features. These design elements and characteristics minimize energy losses, improve power transfer efficiency, enhance system performance, and ensure reliable operation in various mechanical systems and applications.

China best Mxl XL L Htd 3m 5m 8m Aluminum Alloy Timing Synchronous Automotive Rubber Poly V Transmission Belt Pulley   chain pulleyChina best Mxl XL L Htd 3m 5m 8m Aluminum Alloy Timing Synchronous Automotive Rubber Poly V Transmission Belt Pulley   chain pulley
editor by CX