Solution Description
Doing work principle
Roots pumps with pre-admission cooling largely is composed of rotor 1 and 2, pump entire body 4, gasoline cooler 7, and so on(see figure underneath). Owing to its unique inner construction design and style, it can work reliably for a long time under higher differential force and high compression ratio.
The cooling fuel enters the suction chamber of the pump from equally sides of the pump body so that the pump does not overheat because of to the compressed gas, but has no impact on the pumping performance. The determine under demonstrates the rotor rotating 120 levels in the pump chamber and finishing 1 suction and exhaust.
Cooler and motor are needed accessories for each pump, and the technical specs of cooler and motor are dependent on diverse working circumstances. The pumps can be utilized separately or in series, or in combos with liquid ring vacuum pumps and Roots vacuum pumps to achieve increased vacuum to fulfill various method needs.
Major functions
1. When utilized on your own, the operating vacuum can attain a hundred and fifty mbar in direct discharge to environment.
2. Multi-phase tandem or tandem with other backing pumps can attain medium vacuum.
three. Specific framework design makes certain that the pump will not overheat and overload when working at substantial differential force and higher compression ratio.
4. Tri-Lobe profile and substantial precision machining ensure easy and quiet operation.
five. Pumping overall performance, sound, vibration and other main performances are significantly improved than the standard two-lobe pump.
six. An optional advanced well balanced mechanical seal tends to make the pump sealing functionality a lot more trustworthy than the standard lip seal.
seven. The pump housing is oil-free structure, which is suited for pumping out general air and various particular gases.
8. When compared with other mechanical vacuum pumps, the vitality-preserving is up to twenty%.
Solution Parameters
| Type | Nominal pumping pace(50Hz) | Ultimate force | Nominal motor rating (50Hz) | Nominal motor speed (50Hz) | Suction Relationship dimensions | Discharge Link measurement | Highest cooling h2o necessary |
Fat (Without Motor) |
| L/s | Pa | Kw | rpm | mm | mm | L/h | Kg | |
| ZJTQ-150 | a hundred and fifty | 15000 | 3~18.5 | 2900 | eighty | eighty | 3500 | 350 |
| ZJTQ-300 | three hundred | 15000 | five.5~37 | 2900 | one hundred twenty five | one hundred twenty five | 6000 | 350 |
| ZJTQ-600 | 600 | 15000 | seven.5~75 | 1460 | 250 | 200 | 9000 | 650 |
| ZJTQ-1200 | 1200 | 15000 | eleven~132 | 1470 | 300 | 250 | 15000 | 1200 |
| ZJTQ-2500 | 2500 | 15000 | 22~280 | 980 | 350 | 350 | 28000 | 2300 |
| ZJTQ-3750 | 3750 | 15000 | thirty~400 | 1470 | 350 | 350 | 35000 | 2300 |
Observe: The motor power and cooler surface location are decided by the functioning differential pressure, and distinct motors and coolers can be configured for various differential pressures.
Stress diagram
Dimension
| Model | DN | DNI | A | A] | A2 | A3 | B | B1 | B2 | H | H1 | H2 | Φ |
| ZJTQ-one hundred fifty | eighty | 80 | 554 | 281 | fifty five | 132 | 358 | 300 | 210 | 340 | one hundred seventy | 20 | 32 |
| ZJTQ-three hundred | a hundred twenty five | one hundred twenty five | 652 | 325 | 60 | 185 | 428 | 360 | 240 | 405 | 215 | twenty five | forty two |
| ZJTQ-600 | 250 | 250 | 965 | 492 | 90 | 296 | 678 | 560 | 370 | 630 | 210 | fifty | sixty |
| ZJTQ-1200 | 300 | three hundred | 1236 | 642 | 117 | 440 | 770 | 650 | 450 | 680 | 230 | fifty | 85 |
| ZJTQ-2500 | 350 | 300 | 1465 | 763 | 128 | 616 | 942 | 730 | 612 | 880 | 415 | 65 | 90 |
| ZJTQ-3750 | 400 | 350 | 1730 | 925 | one hundred thirty | 820 | 980 | 800 | 600 | 880 | 265 | 70 | one hundred and five |
FAQ
Q: What data need to I supply for an inquiry?
A: You can inquire primarily based on the model straight, but it is usually advisable that you speak to us so that we can support you to verify if the pump is the most appropriate for your application.
Q: Can you make a customized vacuum pump?
A: Sure, we can do some special designs to satisfy consumer applications. These kinds of as customized sealing systems, speical floor treatment can be utilized for roots vacuum pump and screw vacuum pump. Remember to speak to us if you have particular specifications.
Q: I have issues with our vacuum pumps or vacuum programs, can you provide some aid?
A: We have application and design engineers with more than 30 years of encounter in vacuum apps in various industries and support a lot of consumers take care of their troubles, this kind of as leakage issues, vitality-saving solutions, much more atmosphere-friendly vacuum methods, and many others. Remember to make contact with us and we are going to be really satisfied if we can provide any assist to your vacuum technique.
Q: Can you style and make personalized vacuum systems?
A: Sure, we are great for this.
Q: What is your MOQ?
A: 1 piece or 1 established.
Q: How about your supply time?
A: 5-ten working days for the standard vacuum pump if the quantity is under 20 pieces, 20-thirty doing work times for the conventional vacuum technique with much less than 5 sets. For more quantity or particular demands, make sure you get in touch with us to examine the guide time.
Q: What are your payment conditions?
A: By T/T, 50% advance payment/deposit and 50% paid out prior to cargo.
Q: How about the guarantee?
A: We provide 1-yr warranty (except for the wearing parts).
Q: How about the support?
A: We offer remote video clip technological assist. We can ship the service engineer to the web site for some specific demands.
|
US $18,000-20,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Online Video Instruction |
|---|---|
| Warranty: | 1 Year |
| Nominal Pumping Speed(50Hz): | 1200 L/S |
| Ultimate Pressure: | 15000 PA |
| Nominal Motor Rating(50Hz): | 11~132 Kw |
| Nominal Motor Speed(50Hz): | 1470 Rpm |
###
| Type | Nominal pumping speed(50Hz) | Ultimate pressure | Nominal motor rating (50Hz) | Nominal motor speed (50Hz) | Suction Connection size | Discharge Connection size | Maximum cooling water required |
Weight (Without Motor) |
| L/s | Pa | Kw | rpm | mm | mm | L/h | Kg | |
| ZJTQ-150 | 150 | 15000 | 3~18.5 | 2900 | 80 | 80 | 3500 | 350 |
| ZJTQ-300 | 300 | 15000 | 5.5~37 | 2900 | 125 | 125 | 6000 | 350 |
| ZJTQ-600 | 600 | 15000 | 7.5~75 | 1460 | 250 | 200 | 9000 | 650 |
| ZJTQ-1200 | 1200 | 15000 | 11~132 | 1470 | 300 | 250 | 15000 | 1200 |
| ZJTQ-2500 | 2500 | 15000 | 22~280 | 980 | 350 | 350 | 28000 | 2300 |
| ZJTQ-3750 | 3750 | 15000 | 30~400 | 1470 | 350 | 350 | 35000 | 2300 |
###
| Model | DN | DNI | A | A] | A2 | A3 | B | B1 | B2 | H | H1 | H2 | Φ |
| ZJTQ-150 | 80 | 80 | 554 | 281 | 55 | 132 | 358 | 300 | 210 | 340 | 170 | 20 | 32 |
| ZJTQ-300 | 125 | 125 | 652 | 325 | 60 | 185 | 428 | 360 | 240 | 405 | 215 | 25 | 42 |
| ZJTQ-600 | 250 | 250 | 965 | 492 | 90 | 296 | 678 | 560 | 370 | 630 | 210 | 50 | 60 |
| ZJTQ-1200 | 300 | 300 | 1236 | 642 | 117 | 440 | 770 | 650 | 450 | 680 | 230 | 50 | 85 |
| ZJTQ-2500 | 350 | 300 | 1465 | 763 | 128 | 616 | 942 | 730 | 612 | 880 | 415 | 65 | 90 |
| ZJTQ-3750 | 400 | 350 | 1730 | 925 | 130 | 820 | 980 | 800 | 600 | 880 | 265 | 70 | 105 |
|
US $18,000-20,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Online Video Instruction |
|---|---|
| Warranty: | 1 Year |
| Nominal Pumping Speed(50Hz): | 1200 L/S |
| Ultimate Pressure: | 15000 PA |
| Nominal Motor Rating(50Hz): | 11~132 Kw |
| Nominal Motor Speed(50Hz): | 1470 Rpm |
###
| Type | Nominal pumping speed(50Hz) | Ultimate pressure | Nominal motor rating (50Hz) | Nominal motor speed (50Hz) | Suction Connection size | Discharge Connection size | Maximum cooling water required |
Weight (Without Motor) |
| L/s | Pa | Kw | rpm | mm | mm | L/h | Kg | |
| ZJTQ-150 | 150 | 15000 | 3~18.5 | 2900 | 80 | 80 | 3500 | 350 |
| ZJTQ-300 | 300 | 15000 | 5.5~37 | 2900 | 125 | 125 | 6000 | 350 |
| ZJTQ-600 | 600 | 15000 | 7.5~75 | 1460 | 250 | 200 | 9000 | 650 |
| ZJTQ-1200 | 1200 | 15000 | 11~132 | 1470 | 300 | 250 | 15000 | 1200 |
| ZJTQ-2500 | 2500 | 15000 | 22~280 | 980 | 350 | 350 | 28000 | 2300 |
| ZJTQ-3750 | 3750 | 15000 | 30~400 | 1470 | 350 | 350 | 35000 | 2300 |
###
| Model | DN | DNI | A | A] | A2 | A3 | B | B1 | B2 | H | H1 | H2 | Φ |
| ZJTQ-150 | 80 | 80 | 554 | 281 | 55 | 132 | 358 | 300 | 210 | 340 | 170 | 20 | 32 |
| ZJTQ-300 | 125 | 125 | 652 | 325 | 60 | 185 | 428 | 360 | 240 | 405 | 215 | 25 | 42 |
| ZJTQ-600 | 250 | 250 | 965 | 492 | 90 | 296 | 678 | 560 | 370 | 630 | 210 | 50 | 60 |
| ZJTQ-1200 | 300 | 300 | 1236 | 642 | 117 | 440 | 770 | 650 | 450 | 680 | 230 | 50 | 85 |
| ZJTQ-2500 | 350 | 300 | 1465 | 763 | 128 | 616 | 942 | 730 | 612 | 880 | 415 | 65 | 90 |
| ZJTQ-3750 | 400 | 350 | 1730 | 925 | 130 | 820 | 980 | 800 | 600 | 880 | 265 | 70 | 105 |
Pulley Type
There are several types of pulleys. These include fixed pulleys, load multipliers and movable pulleys. Below is a description of each pulley type. A load multiplier is a special type of pulley with multiple wheels for increased lifting capacity. It is used in a wide range of applications including power transmission and construction. Some common uses of pulleys are listed below.
moving pulley
Movable pulleys work by transferring the weight of a load to another object of the same mass. Since a live pulley is inherently frictionless and weightless, the force required to lift a load with it is the same as the weight of the load. This principle applies to tall buildings and residences. It is an excellent choice for lifting heavy objects such as furniture and washing machines.
A pulley is a mechanical device with a wheel that rotates on a shaft. The axle is attached to the wheel and is usually fixed. The movable pulley can be fixed or movable, both of which can change the direction of the force on the rope. Some pulleys can also change the magnitude and direction of the force. They are ideal for a variety of applications, from lifting heavy objects to transporting objects.
Another type of movable pulley works by transmitting force to another object. It has a free axis and the total force provided by the rope tension is balanced. Since the tension on the rope is constant in each segment, pulling one end of the rope will double the force on the shaft, resulting in two mechanical advantages. This mechanical advantage is the main reason why movable pulleys are so versatile.
Another form of moving pulley is called a KWL diagram. The KWL diagram summarizes the basic concepts of the drive wheel. KWL diagrams are an excellent way to assess a student's understanding of the concepts discussed in the course. Word questions are a great way to check whether students understand concepts. When students answer the word questions correctly, the answer is yes!
Fixed wheel pulley
If you need to move heavy objects, a single fixed wheel pulley is not a good choice. Using a single fixed pulley might be similar to using a handbag, but it's not very convenient. This type of pulley system relies on friction to transmit motion. As a result, it can slip and isn't always reliable. Fortunately, you can find other options that work just as well.
Fixed pulleys are the most basic type of pulley. They consist of grooved wheels and ropes attached to objects. These pulleys make lifting easier. Because the rope or cable only moves in one direction, the movement of the object feels lighter. And they are also easy to install. However, before you buy a fixed wheel pulley, make sure it is strong enough to support the weight of the load.
The disadvantages of fixed pulleys are obvious. One of them is the lack of mechanical advantage. A fixed pulley pulls up with the same force as a single moving pulley, and a single fixed pulley is not particularly effective as a force multiplier. However, the effect is more pronounced when you combine multiple fixed-wheel pulleys. You will get double the power! So what do fixed wheel pulleys have to offer?
Fixed wheel pulleys can be as small as a ring. A single ring pulley requires twice as much force as the weight being pulled. Adding more loops to the rope will reduce the effort required to pull the weight. The mechanical advantage of a fixed pulley is proportional to the number of strands running to the free pulley. A 100-pound pull on the free end will lift a 300-pound load.
composite pulley
Compound pulleys are pulleys that can be used to change the direction of a control wire. It can also be used to modify the mechanical force of the wire by moving the item it is connected to. In galleons, compound pulleys are more common. They are often combined with other ropes for mechanical advantage. Here are some common uses for composite pulleys.
The ideal mechanical advantage of a pulley is equal to the number of rope segments that pull up the load. This means that the more rope segments, the less force is required. A compound pulley will have the ideal mechanical advantage of 2, which means it will generate more force than a simple pulley. Composite pulleys are also more efficient at transmitting force because their number of rope segments is usually equal to the unit weight.
Composite pulley systems use more than two pulleys and ropes. More pulleys will reduce the force required to move heavier objects. They are usually used in large sailboats. The system is also used on construction sites. It can be used for a variety of applications, including lifting large objects or transmitting electricity. You can imagine how it would change your life if you had to move a large sailboat, but the result would be the same: a composite pulley system would make it easier to lift a large sailboat.
Composite pulleys are also known as fixed pulleys. The fixed pulley is stationary, and the movable pulley moves back and forth. The latter is more effective when used with a detachable cord or strap. On the other hand, a moving pulley is a moving pulley and it gives you a mechanical advantage. You can imagine this pulley on a flagpole.
load multiplier
The multiplication system has three basic parts: the rope grab, the connector, and the pulley. While some basic multipliers may combine the three parts, the concept remains the same. The multiplication system can make pulling the rope easier by reducing the amount of friction that occurs. Below are some examples of multiplication systems. A compact rope grab is a great option for resetting the multiplier.
The load reduction that a pulley system can achieve is proportional to the number of ropes used to support it. Although most utility pulley systems use only four ropes, the theoretical maximum load reduction is a quarter of the actual load. In other words, the four-wheel system only reduces the weight of a 1,000-pound load by a quarter. That would require 167 pounds of force, a far cry from the 500-pound load a single pulley system can achieve.
The mechanical advantage of a pulley system can be calculated by calculating the ratio between the forces exerted on each wire. For example, a 90-kilogram load is supported by three ropes, each weighing about thirty-five pounds. The ropes on pulleys A and B each carry a load of 60 kg. Using this formula, a single pulley system will yield a mechanical advantage over two tractors.
To calculate the force required to pull the rope over the pulley, measure the angle and deflection between the ropes. The deflection angle when added to the included angle should equal 180 degrees. A 75 degree angle requires 159% of the load force. This means a total load multiplier of four. This formula is an important tool for calculating the force multiple of the pulley.
Disadvantages of fixed pulleys
There are two basic types of pulleys: movable and fixed. Active pulleys are more advanced, allowing the pulley to move according to the load. They reduce the force required to lift the load. Active roller pulleys are more compact and therefore take up less space. Both types are good for lifting heavier objects, but they each have their pros and cons.
Fixed wheel pulleys can be used to lift heavy objects. This type of pulley consists of a wheel with a fixed shaft that has grooves on its edges for guiding ropes or cables. This is a simple machine as no motor or engine is required to lift objects. When two or more wheels are used together, the ropes around the wheels form a powerful hoist.
Single wheel pulleys are not suitable for lifting. They tend to push things down. Also, they are unreliable because they rely on friction and can slip. Also, a single wheel pulley would require a lot of space. Another disadvantage of fixed-wheel pulleys is that they make it difficult to move heavy objects easily. Single fixed-wheel pulleys also tend to slip easily, making them a poor choice for many applications.
Fixed wheel pulleys are also easier to install and maintain than manually operated ones. It requires less space and lubrication than manual pulleys. Manual pulleys can cause injury because the operator will be lifting the full weight of the heavy object. Additionally, rope slippage can lead to muscle strains and rope burns. And the system requires frequent maintenance.
editor by czh 2022-11-27